community.general.imc_rest module – Manage Cisco IMC hardware through its REST API

Note

This module is part of the community.general collection (version 9.4.0).

It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.general. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: community.general.imc_rest.

Synopsis

• Provides direct access to the Cisco IMC REST API.

• Perform any configuration changes and actions that the Cisco IMC supports.

• More information about the IMC REST API is available from http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/api/3_0/b_Cisco_IMC_api_301.html.

Requirements

The below requirements are needed on the host that executes this module.

• lxml

• xmljson >= 0.1.8

Parameters

Parameter	Comments
content string	When used instead of path, sets the content of the API requests directly. This may be convenient to template simple requests, for anything complex use the ansible.builtin.template module. You can collate multiple IMC XML fragments and they will be processed sequentially in a single stream, the Cisco IMC output is subsequently merged. Parameter content is mutual exclusive with parameter path.
hostname aliases: host, ip string / required	IP Address or hostname of Cisco IMC, resolvable by Ansible control host.
password string	The password to use for authentication. Default: "password"
path aliases: src, config_file path	Name of the absolute path of the filename that includes the body of the http request being sent to the Cisco IMC REST API. Parameter path is mutual exclusive with parameter content.
protocol string	Connection protocol to use. Choices: "http" "https" ← (default)
timeout integer	The socket level timeout in seconds. This is the time that every single connection (every fragment) can spend. If this timeout is reached, the module will fail with a Connection failure indicating that The read operation timed out. Default: 60
username aliases: user string	Username used to login to the switch. Default: "admin"
validate_certs boolean	If false, SSL certificates will not be validated. This should only set to false used on personally controlled sites using self-signed certificates. Choices: false true ← (default)

Attributes

Attribute	Support	Description
check_mode	Support: full	Can run in check_mode and return changed status prediction without modifying target.
diff_mode	Support: none	Will return details on what has changed (or possibly needs changing in check_mode), when in diff mode.

Notes

Note

• The XML fragments don’t need an authentication cookie, this is injected by the module automatically.

• The Cisco IMC XML output is being translated to JSON using the Cobra convention.

• Any configConfMo change requested has a return status of ‘modified’, even if there was no actual change from the previous configuration. As a result, this module will always report a change on subsequent runs. In case this behaviour is fixed in a future update to Cisco IMC, this module will automatically adapt.

• If you get a Connection failure related to The read operation timed out increase the timeout parameter. Some XML fragments can take longer than the default timeout.

• More information about the IMC REST API is available from http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/api/3_0/b_Cisco_IMC_api_301.html

Examples

- name: Power down server
  community.general.imc_rest:
    hostname: '{{ imc_hostname }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false  # only do this when you trust the network!
    content: |
      <configConfMo><inConfig>
        <computeRackUnit dn="sys/rack-unit-1" adminPower="down"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Configure IMC using multiple XML fragments
  community.general.imc_rest:
    hostname: '{{ imc_hostname }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false  # only do this when you trust the network!
    timeout: 120
    content: |
      <!-- Configure Serial-on-LAN -->
      <configConfMo><inConfig>
        <solIf dn="sys/rack-unit-1/sol-if" adminState="enable" speed=="115200" comport="com0"/>
      </inConfig></configConfMo>

      <!-- Configure Console Redirection -->
      <configConfMo><inConfig>
        <biosVfConsoleRedirection dn="sys/rack-unit-1/bios/bios-settings/Console-redirection"
          vpBaudRate="115200"
          vpConsoleRedirection="com-0"
          vpFlowControl="none"
          vpTerminalType="vt100"
          vpPuttyKeyPad="LINUX"
          vpRedirectionAfterPOST="Always Enable"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Enable PXE boot and power-cycle server
  community.general.imc_rest:
    hostname: '{{ imc_hostname }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false  # only do this when you trust the network!
    content: |
      <!-- Configure PXE boot -->
      <configConfMo><inConfig>
        <lsbootLan dn="sys/rack-unit-1/boot-policy/lan-read-only" access="read-only" order="1" prot="pxe" type="lan"/>
      </inConfig></configConfMo>

      <!-- Power cycle server -->
      <configConfMo><inConfig>
        <computeRackUnit dn="sys/rack-unit-1" adminPower="cycle-immediate"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Reconfigure IMC to boot from storage
  community.general.imc_rest:
    hostname: '{{ imc_host }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false  # only do this when you trust the network!
    content: |
      <configConfMo><inConfig>
        <lsbootStorage dn="sys/rack-unit-1/boot-policy/storage-read-write" access="read-write" order="1" type="storage"/>
      </inConfig></configConfMo>
  delegate_to: localhost

- name: Add customer description to server
  community.general.imc_rest:
    hostname: '{{ imc_host }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false  # only do this when you trust the network!
    content: |
        <configConfMo><inConfig>
          <computeRackUnit dn="sys/rack-unit-1" usrLbl="Customer Lab - POD{{ pod_id }} - {{ inventory_hostname_short }}"/>
        </inConfig></configConfMo>
    delegate_to: localhost

- name: Disable HTTP and increase session timeout to max value 10800 secs
  community.general.imc_rest:
    hostname: '{{ imc_host }}'
    username: '{{ imc_username }}'
    password: '{{ imc_password }}'
    validate_certs: false  # only do this when you trust the network!
    timeout: 120
    content: |
        <configConfMo><inConfig>
          <commHttp dn="sys/svc-ext/http-svc" adminState="disabled"/>
        </inConfig></configConfMo>

        <configConfMo><inConfig>
          <commHttps dn="sys/svc-ext/https-svc" adminState="enabled" sessionTimeout="10800"/>
        </inConfig></configConfMo>
    delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
aaLogin dictionary	Cisco IMC XML output for the login, translated to JSON using Cobra convention Returned: success Sample: "\"attributes\": {\n    \"cookie\": \"\",\n    \"outCookie\": \"1498902428/9de6dc36-417c-157c-106c-139efe2dc02a\",\n    \"outPriv\": \"admin\",\n    \"outRefreshPeriod\": \"600\",\n    \"outSessionId\": \"114\",\n    \"outVersion\": \"2.0(13e)\",\n    \"response\": \"yes\"\n}\n"
configConfMo dictionary	Cisco IMC XML output for any configConfMo XML fragments, translated to JSON using Cobra convention Returned: success Sample: ""
elapsed integer	Elapsed time in seconds Returned: always Sample: 31
error dictionary	Cisco IMC XML error output for last request, translated to JSON using Cobra convention Returned: failed Sample: "\"attributes\": {\n    \"cookie\": \"\",\n    \"errorCode\": \"ERR-xml-parse-error\",\n    \"errorDescr\": \"XML PARSING ERROR: Element 'computeRackUnit', attribute 'admin_Power': The attribute 'admin_Power' is not allowed. \",\n    \"invocationResult\": \"594\",\n    \"response\": \"yes\"\n}\n"
error_code string	Cisco IMC error code Returned: failed Sample: "ERR-xml-parse-error"
error_text string	Cisco IMC error message Returned: failed Sample: "XML PARSING ERROR: Element 'computeRackUnit', attribute 'admin_Power': The attribute 'admin_Power' is not allowed.\n"
input string	RAW XML input sent to the Cisco IMC, causing the error Returned: failed Sample: "<configConfMo><inConfig><computeRackUnit dn=\"sys/rack-unit-1\" admin_Power=\"down\"/></inConfig></configConfMo>\n"
output string	RAW XML output received from the Cisco IMC, with error details Returned: failed Sample: "<error cookie=\"\"\n  response=\"yes\"\n  errorCode=\"ERR-xml-parse-error\"\n  invocationResult=\"594\"\n  errorDescr=\"XML PARSING ERROR: Element 'computeRackUnit', attribute 'admin_Power': The attribute 'admin_Power' is not allowed.\\n\"/>\n"
response string	HTTP response message, including content length Returned: always Sample: "OK (729 bytes)"
status dictionary	The HTTP response status code Returned: always Sample: 200

Authors

• Dag Wieers (@dagwieers)

Collection links

• Issue Tracker
• Repository (Sources)
• Ask for help
• Submit a bug report
• Request a feature
• Communication